| Pages in topic: [1 2] > | Studio Error - Attempted to read or write protected memory Thread poster: Claudia Alvis
|
|---|
After reformatting my computer, I get this error: Attempted to read or write protected memory. From what I've read, it seems like a system-related problem than a Studio problem, I haven't seen it reported yet. My computer has the basic settings now since I just formated it: Vista SP2, UAC deactivated. I've already emailed someone from SDL and he suggested to run Multiterm as an Administrator, but that didn't make any difference.
This... See more After reformatting my computer, I get this error: Attempted to read or write protected memory. From what I've read, it seems like a system-related problem than a Studio problem, I haven't seen it reported yet. My computer has the basic settings now since I just formated it: Vista SP2, UAC deactivated. I've already emailed someone from SDL and he suggested to run Multiterm as an Administrator, but that didn't make any difference.
This is the the error: Screenshot
This is part of my emailed to SDL:
I get an Error - Attempted to read or write protected memory, similar to what's described here in Article # 2617 in Talisma. The difference is that I don't have terms with Asian characters and I couldn't use that fix since my Home Premium Vista doesn't have that option. I just format my computer and I'm using SP2, which is what I was using in my previous setting, so I don't understand.
The problem happens every time I try to add or edit a new term. I thought it was related to my termbases, I just copied the folder to an external drive and pasted back to the new system, but I created a new termbase and the problem happened again. After the error window pops up, I can't close it or close Multiterm unless I use Windows Task Manager.
Has anybody experienced anything similar or has any light on what might be causing the problem? Also, is there a way to manually add terms to the Multiterm 2009 termbases? I mean, using an external application to modify the termbases with new terms? Something like Access or notepad.
Thanks.
Claudia ▲ Collapse
| | | | | | | I'm getting this error too | Dec 2, 2009 |
Hi Claudia,
Were you able to resolve this issue? I'm getting this error too. Unfortunately, Mena's tips did not lead to a solution in my case.
| | | |
Claudia Alvis wrote:
After reformatting my computer, I get this error: Attempted to read or write protected memory. From what I've read, it seems like a system-related problem than a Studio problem, I haven't seen it reported yet. My computer has the basic settings now since I just formated it: Vista SP2, UAC deactivated. I've already emailed someone from SDL and he suggested to run Multiterm as an Administrator,
LOL.
It means "we have no idea how it works and we can't make it work correctly without administratives rights"...
but that didn't make any difference.
Obviously, it's a bug.
It seems a buffer overflow occurs somewhere in the software.
[...]
This is part of my emailed to SDL: I get an Error - Attempted to read or write protected memory, similar to what's described here in Article # 2617 in Talisma. The difference is that I don't have terms with Asian characters and I couldn't use that fix since my Home Premium Vista doesn't have that option.
The Asian languages support is installed by default in Windows Vista/7 so your system is already "fixed".
The talisma article is incomplete.
Has anybody experienced anything similar or has any light on what might be causing the problem? Also, is there a way to manually add terms to the Multiterm 2009 termbases? I mean, using an external application to modify the termbases with new terms? Something like Access or notepad.
IMHO you should use MT Convert in order to add terms but it's only a palliative.
For editing, you can use Access but you should be [b]very[b] careful.
Cheers
GG
| | |
|
|
|
| Error occurs in the Prepare stage as well | Dec 2, 2009 |
I am unable to start any translation whatsoever after creating a new project and adding a translatable file.
The "Prepare" stage fails with this mysterious error.
Meanwhile, it's good old Trados 2007 for me.
| | | | Claudia Alvis 
Peru
Local time: 21:28
Member
Spanish
+ ...
TOPIC STARTER | It was a system problem | Dec 2, 2009 |
Anil Gidwani wrote:
Hi Claudia,
Were you able to resolve this issue? I'm getting this error too. Unfortunately, Mena's tips did not lead to a solution in my case.
Hi Anil,
I checked my emails to SDL in order to see what the problem was, and it was indeed a system problem. I had a faulty installation. Did you just install any Windows update? If you did, you might want to restore your system to a previous setting. I had to reinstall my system and never saw that problem again.
[Edited at 2009-12-02 17:35 GMT]
| | | |
Restoring the system does solve the problem permanently.
| | | | Susanne Rieg (X)
Local time: 04:28
English to German
+ ...
| Error and Crash when entering terms | Nov 29, 2010 |
I am bringing up this thread again, because I seem to have a similar problem lately (with SP3 and all the latest patches).
In my case the error
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt"
appears when trying to enter or edit terms in Studio Termbase Viewer. Studio immediately crashes and if I did not think of pressings Ctrl S, I have to pre-translate the file from the memory.
I have... See more I am bringing up this thread again, because I seem to have a similar problem lately (with SP3 and all the latest patches).
In my case the error
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt"
appears when trying to enter or edit terms in Studio Termbase Viewer. Studio immediately crashes and if I did not think of pressings Ctrl S, I have to pre-translate the file from the memory.
I have the suspicion, that the error occurs after heavy Multiterm file exports/imports or Studio TM exports/imports... anything with a lot of entries that seem to require a lot of resources, but I am not sure.
Does anyone have an idea how to avoid this nasty Studio crash? ▲ Collapse
| | |
|
|
|
Susanne Rieg wrote:
I am bringing up this thread again, because I seem to have a similar problem lately (with SP3 and all the latest patches).
In my case the error
"Attempted to read or write protected memory. This is often an indication that other memory is corrupt"
appears when trying to enter or edit terms in Studio Termbase Viewer. Studio immediately crashes and if I did not think of pressings Ctrl S, I have to pre-translate the file from the memory.
I have the suspicion, that the error occurs after heavy Multiterm file exports/imports or Studio TM exports/imports... anything with a lot of entries that seem to require a lot of resources, but I am not sure.
Does anyone have an idea how to avoid this nasty Studio crash?
Dear Susanne
What is the latest Java version you are using/ you have installed?
Kind regards
Richard
| | | | Susanne Rieg (X)
Local time: 04:28
English to German
+ ...
Sorry for my late response, Richard, my latest installed Java version is 1.6.0_20 and I have "Use next generation Java-Plug-In" activated (the Studio/Multiterm link will not work without it). My other installed Java Versions are: 1.5.0_10 for Suite as well as 1.6.0_13 plus 1.6.0_14. I could probably deinstall the later two?
Sanne
| | | | | Maybe a helpful workaround... | Dec 6, 2010 |
Susanne Rieg wrote:
Sorry for my late response, Richard, my latest installed Java version is 1.6.0_20 and I have "Use next generation Java-Plug-In" activated (the Studio/Multiterm link will not work without it). My other installed Java Versions are: 1.5.0_10 for Suite as well as 1.6.0_13 plus 1.6.0_14. I could probably deinstall the later two?
Sanne
Dear Susanne
You can try the following:
Close all SDL applications.
1. Go to C:\Program Files\Java\jre6\lib
(if you have a 64bit machine go to C:\Program Files (x86)\Java\jre6\lib )
2. Rename the deploy.jar for example to deploy.jar_OLD
3. Download the deploy.jar from here:
ftp://support_downloads:[email protected]/Richard/Proz/deploy.jar
4. Save/Download it directly to the location C:\Program Files\Java\jre6\lib
5. Try again now the add/edit terms through SDL Trados Studio 2009.
Cheers
Richard
[Edited at 2010-12-06 09:07 GMT]
[Edited at 2010-12-06 09:08 GMT]
| | | | Susanne Rieg (X)
Local time: 04:28
English to German
+ ...
Thanks Richard! I will report back, if this helps...
| | |
|
|
|
Susanne Rieg (X)
Local time: 04:28
English to German
+ ...
| Not sure, if it solves the problem, | Dec 6, 2010 |
as I now get a Java Security Warning Box every time I try to enter a term:
"The Application requires an earlier Java-Version. Do you want to continue?"
PS: I have de-installed Java 1.6 Update 20 to get rid of the error message and will report, if this makes a difference.
[Bearbeitet am 2010-12-07 08:44 GMT]
| | | | | Linked to Multiterm? | Dec 6, 2010 |
I encountered this problem tonight trying to save a segment in Studio 2009 SP3. The segment after the offending segment saved correctly. Checking the detail of the error (why did I not save it?) I saw that Multiterm was mentioned. Closing the three termbases in the project resolved the problem.
Now I have reopened the three termbases but cannot reproduce the problem!
I am not sure if this will help anyone, but it is provided for what it is worth.
[Edited at 2010-... See more I encountered this problem tonight trying to save a segment in Studio 2009 SP3. The segment after the offending segment saved correctly. Checking the detail of the error (why did I not save it?) I saw that Multiterm was mentioned. Closing the three termbases in the project resolved the problem.
Now I have reopened the three termbases but cannot reproduce the problem!
I am not sure if this will help anyone, but it is provided for what it is worth.
[Edited at 2010-12-06 20:37 GMT] ▲ Collapse
| | | | Susanne Rieg (X)
Local time: 04:28
English to German
+ ...
| Seems to work | Dec 10, 2010 |
SDL Support wrote: 1. Go to C:\Program Files\Java\jre6\lib (if you have a 64bit machine go to C:\Program Files (x86)\Java\jre6\lib ) 2. Rename the deploy.jar for example to deploy.jar_OLD 3. Download the deploy.jar from here: ftp://support_downloads:[email protected]/Richard/Proz/deploy.jar 4. Save/Download it directly to the location C:\Program Files\Java\jre6\lib 5. Try again now the add/edit terms through SDL Trados Studio 2009.
Hi Richard, after three days of continuous Studio use I think I can safely report that this seems to have made my Multiterm-Studio connection considerably more reliable....
So far the error has not reappeared.
Thanks, again!
| | | | | Pages in topic: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Studio Error - Attempted to read or write protected memory | TM-Town | Manage your TMs and Terms ... and boost your translation business
Are you ready for something fresh in the industry? TM-Town is a unique new site for you -- the freelance translator -- to store, manage and share translation memories (TMs) and glossaries...and potentially meet new clients on the basis of your prior work.
More info » |
| | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to SDL Trados
